Arm'Cleaner, the cost-effective answer to your expectations!
Do you have energy efficiency to achieve?
By switching from a multi-nozzle conveyer belt (10x10L / min) to a single 40L / min nozzle, you save 3.6m3 / hour, which is 75m3 / month.
This makes a considerable gain in resources and working hours per month.
If you need 2 passes with a multi-nozzle conveyer belt, you only need one with the Arm-Cleaner.
In addition, the arm-cleaner does not need electricity to operate.
Do you have MO savings to achieve on the cleaning service (internal or external)?
A four 1100mm wide strip cleaned required in 45min takes 190 hours by a multiplier by € 25 the average hourly rate will make € 4,750 by a labor cost for cleaning only.
Cleaning in masked time increases the cleaning perimeter. In addition, the device does not require any maintenance apart from the occasional lubrication of the 2 bearings.
Arm-Cleaner, a quick return on investment for simple and durable operation:
By taking these 2 positions into account, we quickly arrive at a return on investment in less than 6 months.
Do you need rock-solid cleaning reliability, day after day, month after month, year after year?
The first Arm’Cleaners delivered more than 4 years ago have not been the subject of any service return, nor any request for wearing parts. The Arm’Cleaner is self-contained and oversized: all the materials that make up the Arm’Cleaner are standard commercial components (304L stainless steel profiles and food-grade plastics).
The movements of the moving parts are of the reciprocating type and low stress, producing very low wear.
Do you need to increase the reliability of the bacteriological quality of your conveyors?
The impact of a 15°C nozzle at 40L / min is much greater than 10 nozzles 20°C at 10L / min on dirt. On the other hand, a self-cleaning device is more regular, reliable than a human arm. Saving time and quality is possible with the Arm’Cleaner. The calibration of the jet, its speed of movement and its distance from the surface to be cleaned are essential for effective cleaning.
Do you need to increase your productivity on certain products?
Continuous efficient cleaning of a clogged oven mat will reduce sticking and therefore the loss of material at the outlet. Also, the Arm’Cleaner will save you time when changing products.
Do you need a device that is simple to operate and adjust?
We know that an operator staying more than 15 minutes with the same repetitive gestures on a conveyor (wide 100cm for example) begins to feel discomfort in the arms, elbow, and shoulder. He will have to change arms…
MSD represent 87% of PD, the average cost in IAA is 28,000e for a stop of more than 150 days, …
Do you need a special positioning of your carpet washer?
The Arm’Cleaner can be positioned above and below, as well as between bands. It can be positioned inside a freezer. The average footprint is about 30-40cm in height and length about the width of the conveyor / 2 (length of the movable arm). This arm can be attached to one side if you want clearance above the conveyor.
The Arm’Cleaner can be in mobile form with multiple configurations.
Do you need a device that is simple to operate and adjust?
The Arm-Cleaner works from 4-5 bar up to over 100 bar. Its design is hygienic.
Adjusting the speed of the Arm’Cleaner is simply done without keys: turn 2 knobs (L and R) and adjust 2 stops. Installation is simple and does not need millimeter precision.
