ARM'CLEANER STANDARD UNIT
EQUIPMENT FOR STANDARD CONVEYORS
Arm'Cleaner Standard top
Arm'Cleaner Standard Bottom
FOR WHICH CONVEYORS?
- Washing over or under fixed
- Working width: 400 to 1300mm
DEVICES FOR NON-STANDARD CONVEYORS
Arm'Cleaner Top Non-Standard
Arm'Cleaner Below Non-Standard
FOR WHICH CONVEYORS?
- Fixed wash over or under
- Working width: 1400 to 2000mm
PS: An Arm’Cleaner Non-Standard above is removable but can only be handled with 2 people. A non-standard AC is built on a 60×6 angle iron instead of 50×5.
REMOVABLE ARM'CLEANER DEVICE
Arm'Cleaner Removable over and between 2 strips
FOR WHICH CONVEYORS?
Washing over and between 2 bands, mainly on bands from 400 to 900mm.
OTHER CHARACTERISTICS?
The device is lightened for this application: about 15kgs. It is still being developed in order to reach around 13kgs without loss of reliability.
-Between 2 bands: the available height must be at least 21cm
FOR WHICH CONVEYORS?
Gantry with 180 ° rotating device for cleaning 2 belts to follow.
Other possible configurations depending on the situation, congestion …
OPTIONAL
Foamer: the ability to foam (detergency, disinfection) to be followed by washing without downtime: eg. a strip of the freezer with 30 min of passage time: the appliance cleans, one foam behind to follow, the appliance rinses to follow without having been stopped then to follow (by manual or automatic switching by a programmer on satellite) on disinfected.
Fixed in the rear on the frame of the device.
Arm'Cleaner Special
